Using the af trigger (dmc-lc80 / dmc-lc70), Using the af trigger (dmc-lc80/dmc-lc70) – Panasonic DMC-LC70PP User Manual

Page 68

Advertising
background image

Recording pictures (advanced)

68

Using the AF Trigger
(DMC-LC80/DMC-LC70)

Prefocus is a technique to focus on the point where the subject comes in advance,
and it is used when taking a picture of the subject with quick motion.
This function is suitable when the distance between the camera and the subject is
certain.

Preparation
• Set the mode dial except for [

]/[

]/[

]. (P29)

1

Select [AF TRIGGER] and set it to
[FOCUS].

• Close the menu by pressing

[MENU] button after finishing the
setting.

2

Aim the AF area to the point
where you want to focus (P30) and
press the [FOCUS] button.

• When the subject is focused, the

AF area turns from white to green
and the focus indication

1 lights up

for 1 second. If the subject is out of
the focus range, the focus
indication will keep on blinking.

• Even when pressing the shutter

button halfway, the focus will not be
changed unless you press the
[FOCUS] button again.

• When you press the shutter button

halfway, [

] indication

disappears and then the aperture
value and the shutter speed are
displayed.

• When you press the shutter button

halfway without pressing the
[FOCUS] button, the [

]

indication turns to red.

WB

WB

SELECT

SET

EXIT

MENU

REC

2

/

3

SETUP

AF TRIGGER

AUDIO REC.

SHUTTER

D.ZOOM

OFF

FOCUS

OFF

SPOT MODE

OFF

1600

19

AF

FOCUS

AF

FOCUS

AF

FOCUS

DMC-LC80.book 68 ページ 2004年6月15日 火曜日 午後5時49分

Advertising
This manual is related to the following products: