Panasonic AJ-HDC27FE - Manual (Page 25)

25 (E)
Power supply
Using the Sony NP-1/BP-90 battery
pack
Attach the Sony battery holder. As shown in the
figure, attach the battery case with the cover detached
and then the detached cover.
1 Tighten the mounting screws.
2 Tighten the power contact screws.
3 Insert the top of the detached cover in the direction
shown by the arrows.
4 Align the holes in the bottom of the cover (metal
part) with the holes at the bottom of the case, and
use the screws to attach the case.
<Note>
When mounting the battery holder, take care not to
pinch the connecting cord.
Using the V-mount type battery
pack
1
3
4 2
Battery case for NP-1
Battery case for BP-90
2
1
3
4
Attach the V-mount adapter plate.
Insert it in the direction shown by the arrows, and slide
it into place.
Please consult your local dealer for any questions
regarding the NP/BP adapter plate or V-mount
adapter plate.