Panasonic AJ-HDC27FE - Manual (Page 71)

71 (E)
How to use the scene file
14
Turn the JOG dial button to move the arrow
(cursor) to YES, and press the JOG dial button.
The data settings and title are saved in the
scene file area of the camera’s memory.
<Note>
The setting is not effective if the unit is
transferred to a different menu or if the menu is
exited without executing “WRITE.”
15
After the data has been saved, press the MENU
button twice.
The setting menu is cleared, and the displays
showing the unit’s current statuses appear at the
top and bottom of the viewfinder screen.
13
When the JOG dial button is pressed, the
following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
WRITE ?
YES
n NO
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
n WRITE
RESET
TITLE1: 22222222
TITLE2:
TITLE3:
TITLE4:
12
Turn the JOG dial button to move the arrow
(cursor) to the WRITE item.
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
m
TITLE1: 22222222
TITLE2:
TITLE3:
TITLE4:
10
When the title has been input, turn the JOG dial
button to move the arrow (cursor) to the “:”
position.
< INITIALIZE >
READ FACTORY DATA
WRITE USER DATA
SCENE SEL :1
READ
WRITE
RESET
n TITLE1: 22222222
TITLE2:
TITLE3:
TITLE4:
11
When the JOG dial button is pressed, the arrow
(cursor) returns to the TITLE1, TITLE2, TITLE3
or TITLE4 item.