Panasonic AJ-HDC27FE - Manual (Page 29)

29 (E)
Adjusting the white shading
This unit can store up to 8 white shading
compensations as white shading files in memory.
Using this data, it is possible to quickly reproduce the
appropriate white shading adjustment even after
switching lenses.
Follow the procedure described below when repeating
a white shading adjustment or when creating a new
white shading file.
White shading files
Storing of white shading adjustment values in memory
for each lens changed and reading of data which has
been stored are performed using the menus.
<Notes>
O The method below can be used for the white
shading adjustments with most lenses. However,
with some very special lenses, a different
adjustment method may be necessary.
O
Even when the white shading has been adjusted,
tinting may occur in the vertical direction near the
lens aperture open position. This is a phenomenon
which is inherent to lenses and optical systems and
is not indicative of malfunctioning.
Storing white shading adjustment values
7
Repeat steps 5 and 6 , however this time set the
ZEBRA2 DETECT to 85% and ZEBRA2 to SPOT.
8
Turn the JOG dial button to move the arrow
(cursor) to the <VF DISPLAY> item, and press the
JOG dial button.
4
Perform the menu operations (pages 86 to 88),
and display the “VF DISPLAY” screen of FILM
(CAM) MAIN MENU 2.
5
Turn the JOG dial button to move the arrow
(cursor) to the ZEBRA1 DETECT item, and press
the JOG dial button.
6
Turn the JOG dial button, select 70% and then
press the JOG dial button to enter the setting.
n < VF DISPLAY >
DISP CONDITION :NORMAL
DISP MODE :3
VF OUT :Y
VF DTL :4
ZEBRA1 DETECT :080%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
LOW LIGHT LVL :45%
SYNCHRO SCAN DISP.:deg
ECU MENU DISP. :ON
10
Press the JOG dial button until FILM (CAM)
MAIN MENU 4 is displayed, then turn the JOG
dial button to move the arrow (cursor) to the
WHITE SHADING item, and press the JOG dial
button again.
2222 FILM MAIN MENU4 2222
FILM USER MENU SELECT1
FILM USER MENU SELECT2
FILM USER MENU SELECT3
BLACK SHADING
n WHITE SHADING
FLARE
COLORIMETRY
INITIALIZE
DIAGNOSTIC
EVALUATION
OPTION
9
Turn the JOG dial button to move the arrow
(cursor) to the FILM (CAM) MAIN MENU 2 item.
SHUTTER: OFF
GAIN: L (0 dB)
1
Attach the lens to the camera.
At this stage, do not forget to connect the lens
cable.
2
Set the electronic shutter to OFF, and set the gain
to “L (0 dB).”
3
If the lens is provided with an extender, disengage
the extender function.