Panasonic DMR-EX78 - Manual (Page 50)

50
RQT9088
Copying still pictures
Instructions/notes regarding SD cards and SD drive are
applicable to the DMR-EX88 model only.
[HDD] [RAM] [USB] [SD]
≥SDHC Memory Cards used for recording with this unit can only be
used with other SDHC Memory Card-compatible equipment.
SDHC Memory Cards cannot be used with equipment that is only
compatible with SD Memory Cards.
≥You cannot copy pictures recorded to CD-R/CD-RW.
≥Still pictures copied from USB memories or SD cards are grouped
by the shooting date in the HDD or DVD-RAM.
[USB] > [HDD] or [RAM]
1
While stopped
Insert the USB memory ( ➡ 14).
The menu is automatically displayed.
2
Press [ 3, 4] to select “Copy Pictures
(JPEG)” and press [OK].
3
Press [ 3, 4] to select “Copy to” and
press [ 2, 1] to select the drive.
4
Press [ 3, 4, 2, 1] to select “Copy”
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
[Note]
≥The structure of folders on the USB memory may not be the same
at the copy destination.
≥If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum ( ➡ 13), copying will
stop partway through.
≥You cannot copy the information about the picture rotation.
[SD] > [HDD] or [RAM]
This unit saves information about imported still pictures. Therefore, if
still pictures are imported from the same SD card, then only new still
pictures will be imported.
1
While stopped
Insert the SD card. (
➡ 14).
The menu is automatically displayed.
2
Press [ 3, 4] to select “Copy Pictures
(JPEG)” and press [OK].
3
Press [ 3, 4] to select “Copy to” and
press [ 2, 1] to select the drive.
4
Press [ 3, 4, 2, 1] to select “Copy”
and press [OK].
To stop copying
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
[Note]
≥This unit saves the information on up to 12,000 still pictures and 30
SD cards. If additional still pictures are imported, then the older
information will be deleted.
≥If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum ( ➡ 13), copying will
stop partway through.
≥You cannot copy the information about the picture rotation.
[HDD] [RAM] [SD]
1
While stopped
Press [FUNCTION MENU].
2
Press [ 3, 4] to select “To Others”
and press [OK].
3
Press [ 3, 4] to select “Advanced
Copy” and press [OK].
≥If you are not going to change the registered list press [4]
several times ( ➡ step 7).
4
Set the copy direction.
≥If you are not going to change the copying direction, press
[ 4] ( ➡ step 5).
1 Press [ 3, 4] to select “Copy Direction” and press [1].
2 Press [ 3, 4] to select “Source” and press [OK].
3 Press [ 3, 4] to select the drive and press [OK].
4 Press [ 3, 4] to select “Destination” and press [OK].
5 Press [ 3, 4] to select the drive and press [OK].
The same drive as the copy source can be selected.
6 Press [ 2] to confirm.
5
Set the copy mode.
≥If you are not going to change the recording mode, press
[ 4] ( ➡ step 6).
1 Press [ 3, 4] to select “Copy Mode” and press [1].
2 Press [ 3, 4] to select “Format” and press [OK].
3 Press [ 3, 4] to select “PICTURE” and press [OK].
“Recording Mode” is automatically set to “High Speed”.
4 Press [ 2] to confirm.
Copying all the still pictures on the USB
memory—Copy All Pictures
Copying new still pictures on the SD
card—Copy New Pictures
[EX88]
USB device
OK RETURN
SELECT
Play Video (DivX)
Play Pictures (JPEG)
Copy Pictures (JPEG)
Play Music (MP3)
Copy Music (MP3)
Update CD database on HDD
Copy All Pictures
Copy from USB
Copy to HDD
SD Card
Copy Pictures (JPEG)
Play Pictures (JPEG)
OK RETURN
SELECT
Copying using the copying list
Copy New Pictures
Copy from SD CARD
Copy to HDD
Copy
SD CARD
HDD
1
2
3
Source
Destination
Cancel All
Copy Direction
Copy Mode
Create List
SD CARD  HDD
PICTURE High Speed
0
DMREX78&88GN-RQT9088-L_eng.book 50 ページ ２００８年４月１日 火曜日 午後６時３８分