Pentax *ist IST DS - Manual (Page 193)

191
6
Appe
ndix
EV Compensation
±2.0EV (Selectable between 1/2EV and 1/3EV for Exposure
setting steps)
AE lock
Button type (timer type 20 sec.) possible to continue with shutter
button halfway pressed
Built-in flash
P-TTL built-in flash with serial control , GN 15.6 (ISO 200/m),
Angles of coverage: 20 mm lens angle of view, Flash
synchronization speed range at 1/180 sec. and slower, Daylight-
sync flash, Slow-speed-sync flash, ISO range = P-TTL: 200 to
3200
External Flash sync
Hot shoe with X-contact, which couples with Pentax dedicated
auto flashes, ISO range = P-TTL: 200-3200/TTL: 200-400,
Automatic flash, Red-eye reduction flash function, High-speed-
sync, wireless-sync with PENTAX dedicated flash.
Custom Function 18 functions can be set
Time Function World Time settings for 68 cities (28 time zones)
Power
Two CR-V3, four AA lithium, AA Ni-MH rechargeable, or AA
alkaline batteries
Battery Exhaustion
Battery exhaustion symbol ? is lit. The shutter is locked and
no indication appears in the viewfinder when ? starts blinking
In/Out Port
USB/Video terminal (USB2.0 (high speed compatible)), DC
input terminal, Cable switch terminal
Video Output Format NTSC/PAL
PictBridge
Compatible printer PictBridge-compatible printer
Print mode
Print One, Print All, DPOF AUTOPRINT
Dimensions and
Weight 125 mm (W) × 92.5 mm (H) × 66 mm (D)
505 g (body only without batteries)
Accessories
Hot shoe cover F
K
, Eyecup F
L
, ME viewfinder cap, Body mount
cover, USB Cable I-USB17, Video cable I-VC28, Software (CD-
ROM) S-SW28, Strap O-ST10, Two CR-V3 lithium batteries,
Operating manual (this book) and PENTAX PHOTO Browser
2.0/PENTAX PHOTO Laboratory 2.0 operating manual
Specification for Remote Control (Optional)
Remote Control
Infrared Remote Control unit, captured about three seconds
after remote control shutter button is pressed, operating
distance = within approx. 5 m in front of the camera.
Power One lithium battery (CR1620)
Size 22 mm (W) × 53 mm (H) × 6.5 mm (D)
Weight 7g (including battery)