PoGo Products T1 - Manual (Page 54)

53
<MEDIAGATE T1’s IP Address>
ü If you are connected to a DHCP Server or Router,
select ‘DHCP: ON’. You will be given an automatic IP
Address and Subnet Mask from the DHCP Server or
Router. You can then see the IP Address/Subnet Mask
that was issued.
ü The IP Address of the MEDIAGATE T1 MUST be on
the same range as the computer or network. For
example, if MEDIAGATE T1 is at 192.168
.0. 2 and the
computer is on 192.168 .1. 3, then they will not be able to
communicate. The first three sets of numbers must
match, while the fourth set of number(s) must be unique.
The Subnet Mask must always match.