Pentax 645N2 User Manual
Page 68
66
ADV
ANCED OPERA
TIONS
1
2
To set
1. Set the exposure compensation dial to [ D ]. [ D ] will be displayed on the LCD panel.
2. Press up/down button repeatedly until [ on ] appears on the LCD panel.
If [
] is displayed on the LCD panel, the exposure data will be imprinted on the negative.
• With a 645 A- lens attached, the exposure data but not the focal length of the lens will be imprinted even
if [
] is displayed on the LCD panel.
• With an accessory without the lens information contacts such as a helicoid extension tube attached, the
exposure data but not the focal length and aperture setting of the lens will be imprinted even if [
] is dis-
played on the LCD panel.
• Since the exposure data are imprinted on the outside of picture frame, the data will not be seen on the
actual photographs.
• The shutter cannot be released with the exposure compensation dial set at [ D ].
D
D
D