Pentax 645N2 - Manual (Page 70)

USING A PENTAX DEDICATED EXTERNAL FLASH
68
Using the TTL Auto Flash
1. Remove the hot shoe cover and attach a
Pentax dedicated flash unit.
2. Turn the flash ON.
3. Set the flash to TTL Auto mode.
4. Confirm that the flash is fully charged.
5. Focus on the subject and release the shutter.
Auto Bracketing Exposure mode with a Pentax
TTL dedicated flash
When the auto bracketing exposure mode is select-
ed with a Pentax dedicated TTL flash in use, only
the amount of flash output is varied.
• When the flash is fully charged, the ready lamp on
the flash unit lights up. When the shutter release
button is depressed halfway down, [
] appears
in the viewfinder indicating the flash is ready.
• For more details, read the flash operating manual.
Exposure Compensation with a Pentax TTL ded-
icated flash
When the exposure compensation is set with a
Pentax TTL flash in use, it makes possible to adjust
the brightness of the subject on the background and
the main subject respectively.
ADV
ANCED OPERA
TIONS