Pioneer DEH-P9650MP - Manual (Page 22)

2 Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Form 1
Play time : disc title : disc artist name
 : track title : track artist name
Form 2
Play time and : disc titlePlay time and :
disc artist namePlay time and : track title
Play time and : track artist name :
disc title and : track title : disc artist
name and : track title
# If specific information has not been recorded
on a CD TEXT disc, No xxxx will be displayed
(e.g., No artist name).
Scrolling titles in the display
This unit can display the first 22 letters of disc
title, disc artist name, track title and track ar-
tist name. When the text information is longer
than 22 letters, you can scroll the display as
follows.
1 Press OPEN to open the front panel.
2 Press DISPLAY and hold until the title
begins to scroll through the display.
The titles scroll.
Notes
! When Ever Scroll is set to ON at the initial set-
ting, CD text information scrolls continuously
in the display. If you want to display the first
22 characters of text information temporarily
and scroll from the beginning, press and hold
DISPLAY. About Ever Scroll, refer to Switching
the Ever Scroll on page 55.
! When you select the display form 2, the titles
are displayed up to 14 letters long (refer to
page 9).
Selecting tracks from the
track title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1 Press FUNCTION to select track title list.
Press FUNCTION until track title list appears
in the display.
2 Press a or b to scroll through the list of
track titles.
# If track title has not been recorded on a disc,
No T.Title will be displayed.
3 Press d to select the desired track title.
That selection will begin to play.
Built-in CD Player
En
22
Section
05