Setting the high pass filter for rear, Speakers 46, Using the auto-equalizer – Pioneer DEH-P9650MP User Manual

Page 46: Recalling equalizer curves 46, Setting the high pass filter for rear speakers, Recalling equalizer curves, Audio adjustments

Advertising
background image

5 Press a or b to adjust the output level

of the front speakers.

Each press of a or b increases or decreases

the level of the front speakers. ±0  24 is dis-

played as the level is increased or decreased.

Setting the high pass filter for

rear speakers

1 Press AUDIO and hold until second

audio menu appears in the display, then

press AUDIO to select HP R1.

After second audio menu is displayed, press

AUDIO until HP R1 appears in the display.

2 Press c or d to select slope.

Each press of c or d selects slopes in the fol-

lowing order:

12 6Pass (0) (dB/oct.)

# If you set the slope to 0 dB/oct. (Pass), the
audio signal bypasses the filter, so the filter does
not have an effect.

3 Press AUDIO to select HP R2.

Press AUDIO until HP R2 appears in the dis-

play.

4 Press c or d to select cut-off frequency.

Each press of c or d selects cut-off frequen-

cies in the following order:

506380100125160200 (Hz)

Only frequencies higher than those in the se-

lected range are output from the rear speak-

ers.

5 Press a or b to adjust the output level

of the rear speakers.

Each press of a or b increases or decreases

the level of the rear speakers. ±0  24 is dis-

played as the level is increased or

decreased.

Using the auto-equalizer

The auto-equalizer is the equalizer curve cre-

ated by auto TA and EQ (refer to Auto TA and

EQ (auto-time alignment and auto-equalizing)

on page 49).

You can turn the auto-equalizer on or off.

1 Press AUDIO and hold until second

audio menu appears in the display, then

press AUDIO to select AUTO EQ.

After second audio menu is displayed, press

AUDIO until AUTO EQ appears in the display.

2 Press a to turn the auto-equalizer on.

Auto EQ ON appears in the display.

# To turn auto-equalizer off, press b.
# Please set Auto EQ appears. This indicates
that you cannot turn the auto-equalizer on if auto
TA and EQ has not been carried out.

Recalling equalizer curves

The equalizer lets you adjust the equalization

to match car interior acoustic characteristics

as desired.

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves:

Display

Equalizer curve

SUPER BASS

Super bass

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

FLAT

Flat

CUSTOM1

Custom 1

CUSTOM2

Custom 2

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves that you create. Adjust-

ments can be made with a 13-band graphic

equalizer.

Audio Adjustments

En

46

Section

08

Advertising