Pioneer DEH-P9650MP - Manual (Page 55)

1 Press FUNCTION to select
Face auto open.
Press FUNCTION repeatedly until
Face auto open appears in the display.
2 Press a or b to turn Face auto open on
or off.
Pressing a or b will turn Face auto open on
or off and that status will be displayed (e.g.,
Face auto open ON).
Using the feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
You can turn the feature demo on or off.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
1 Press FUNCTION to select
Demonstration.
Press FUNCTION repeatedly until
Demonstration appears in the display.
2 Press a or b to turn Demonstration on
or off.
Pressing a or b will turn Demonstration on
or off and that status will be displayed (e.g.,
Demonstration ON).
Using reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.
1 Press FUNCTION to select
Reverse mode.
Press FUNCTION repeatedly until
Reverse mode appears in the display.
2 Press a or b to turn Reverse mode on
or off.
Pressing a or b will turn Reverse mode on or
off and that status will be displayed (e.g.,
Reverse mode ON).
Switching the Ever Scroll
When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Press FUNCTION to select Ever-scroll.
Press FUNCTION repeatedly until Ever-scroll
appears in the display.
2 Press a or b to turn Ever-scroll on or
off.
Pressing a or b will turn Ever-scroll on or off
and that status will be displayed (e.g.,
Ever-scroll ON).
Initial Settings
En
55
English
Section
09