Pioneer DEH-P6450 - Manual (Page 31)

En 31
English
Español
Deutsch
F
rançais
Italiano
Nederlands
07
Section
Initial Settings
Setting the AM tuning step
The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press FUNCTION to select AM .
Press FUNCTION repeatedly until AM Step
appears in the display.
2 Select the AM tuning step with
2/3.
Pressing
2/3 will switch the AM tuning step
between 9 kHz and 10 kHz. The selected AM
tuning step will appear in the display.
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press FUNCTION to select WARN .
Press FUNCTION repeatedly until Warning
appears in the display.
2 Select WARN on or off with
5/∞.
Pressing
5/∞ will switch
Warning between on
and off and that status will be displayed (e.g.,
Warning :ON ).
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press FUNCTION to select AUX .
Press FUNCTION repeatedly until AUX appears
in the display.
2 Select AUX on or off with
5/∞.
Pressing
5/∞ will switch
AUX between on and
off and that status will be displayed (e.g.,
AUX :ON ).
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car’s headlights are turned on. You
can switch dimmer on or off.
1 Press FUNCTION to select DIM .
Press FUNCTION repeatedly until Dimmer
appears in the display.
2 Select DIM on or off with
5/∞.
Pressing
5/∞ will switch
Dimmer between on
and off and that status will be displayed (e.g.,
Dimmer :ON ).
07