Pioneer VSX-37TX - Manual (Page 29)

29
SET
UP
Setting Up for Surround Sound
To ensure the best possible surround sound, be sure to complete the following setup operations. You only need
to make these settings once (unless you change the placement of your current speaker system or add new
speakers, etc.).
This receiver uses on-screen displays to make setting up your home cinema system easier. Switch on the
receiver and your TV, and make sure that the receiver is selected as your TV's video input.
1 Set the slide switch to SETUP.
Also make sure your TV is on and set to the receiver.
• When you're done setting up the receiver, remember to
set the slide switch back to USE.
2 Press the SYSTEM SETUP button.
System Setup
[ Digital-In Select ]
[ Speaker Setting ]
[Channel Delay]
[Channel Level]
[Crossover Network]
[Bass Peak Level]
[D-Range Control]
[Multi Channel In]
[Multi-Room]
This SYSTEM SETUP MENU appears on your TV screen.
dB
STEREO SIGNAL
SELECT
ANALOG SP
A
AUTO
VOLUME
This display appears on the receiver.
• You can escape from this screen at any time by pressing the
SYSTEM SETUP button again. None of the settings you
made will be entered in this case.
• If you don't enter any settings the receiver will revert back to
its previous state after three minutes.
3 Press the
5 or ∞ arrow buttons to move the
hand to the mode you want. Then press the
ENTER button.
In each mode, the current settings are displayed automatically.
We suggest you adjust all these settings when you first hook
up the receiver. That gets them out of the way and you won't
need to return to this setting mode unless you change your
home set up by adding new speakers (etc.). The sound set up
modes explained here are:
Digital In Select (See p.31)
In order to use your digital components you must match the
numbered digital input settings with the numbered digital jacks
used by your digital components.
Speaker Setting (See p.32-33)
Use to specify the type and number of speakers you
connected.
Initial Set Up
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/
CH SEL
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
+ +
– –
+
–
1
3
2
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
/DTS
SIGNAL
SELECT
DTV ON/OFF DTV MENU
TUNING