Pioneer VSX-37TX - Manual (Page 71)

OPERA
TION
71
Multi Operations
A Multi Operation is a sequence of commands programmed into a single button to save you a lot of repetitive
button pressing. Once setup, pressing the MULTI OPERATION button followed by one of the MULTI CONTROL
buttons will switch on that component, the receiver and your TV, and switch the function of the receiver to that
component. Up to five more commands can be programmed into a Multi Operation, such as changing the sound
mode of the receiver and starting playback of the source.
Important: For Multi Operations to work with other non-Pioneer components, you must first setup the remote to
control those other components—see pages 58-61 for more on this.
1 Set the remote control slide switch to
SETUP.
Also make sure that your TV is on and set to the receiver.
2 Press the REMOTE SETUP button (INPUT
ATT) and 3 at the same time to select the
MULTI OPERATION SETUP mode.
The REMOTE SETUP menu appears on your TV screen. The
MULTI CONTROL and the SYSTEM OFF buttons start to blink
(see the following page for more on the SYSTEM OFF button).
Multi-operation
1 Select an item from the
Multi-Contorol buttons.
(ex. DVD)
2 Select the operation
button. (ex. DVD = MENU)
3 First command has been
learned.
4 You can repeat this
proccess for 5 commands.
EXIT = Remote Setup
• To cancel here, press REMOTE SETUP.
3 Select a MULTI CONTROL button for this
MULTI OPERATION.
Each MULTI CONTROL button can be used for one Multi
Operation. If a Multi Operation relates to using a DVD player,
for example, it makes sense to select the DVD/LD button.
After pressing a MULTI CONTROL button, just that button will
remain blinking.
4 Select the MULTI CONTROL button for a
source component.
For example, if you want this Multi Operation to switch on your
DVD player press the DVD/LD.
After pressing a MULTI CONTROL button, that button stays lit.
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
S0URCE
DVD/LD TV/SAT VCR1 VCR2
CD
TV VOL
TV FUNC
MENU
ENTER
STEREO/
DIRECT DSP
THX LIGHT
MUTE
TV
VOLUME
MD/
TAPE1 TUNER TVCONT
RECEIVER
USE SETUP
MULTI
OPERATION
CLASS MPX DIRECT ACCESS
CHANNEL
STATION
TV CONTROL
FUNCTION
REMOTE SETUP
SYSTEM SETUP
INPUT
ATT
MIDNIGHT MULTI CH
INPUT
STANDARD
DIGITAL
NR
EFFECT/ CH SEL
SIGNAL
SELECT
BAND
SYSTEM
OFF
1 2 3
4 5 6
7 8 9
0
Î
¶ 8 7 3
1 ¡ 4 ¢
+ -
+ -
+ -
MULTI CONTROL
+ +
– –
+
–
1
2
2
3,4
ADVANCED
DISC
EXIT
+10
GUIDE
ENTER
/DTS
DTV ON/OFF DTV MENU
TUNING
Using Other Functions