Pioneer VSX-37TX - Manual (Page 88)

88
Cause
• Either the digital connections or the
DIGITAL IN SELECT choices are
incorrect.
• The TAPE2 MONITOR mode is ON.
• You are not using a source with
Surround EX flag.
• The player is paused or stopped.
• There is a mistake in the player
settings for audio output.
• Although it's a Dolby Digital / DTS
source there is a possibility the
present track is not Dolby Digital /
DTS.
Remedy
• Make sure the digital connections and
the DIGITAL IN SELECT choices are
done correctly.
• Press the TAPE2 MONITOR button so
it goes into the OFF setting.
• There is no problem with your
receiver but if you want to hear 7
channel sound use an Surround EX
source.
• Play the source.
• Fix the audio settings (check the
manual that came with your DVD
player.
• There is no problem. The indicator
won't light when the track is not a
Dolby Digital / DTS track.
Symptom
You can't get DIGITAL to come
up when using the SIGNAL
SELECT button.
When using THX AUTO mode
the receiver is not playing in the
EX mode.
The Dolby Digital / DTS
indicator doesn't light up even
when playing a Dolby Digital /
DTS source.
If the unit does not operate normally due to external effects such as static electricity
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
Techno Tidbits & Problem-solving