Precor EFX 532 User Manual
Page 28
page 28
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
In Pause
mode, you
This is what happens...,
resume pedaling Returns to the course and workout statistics continue from
where you left off.
press Reset
Exits Pause mode and returns to the Precor banner.
exceed time limit The EFX exits Pause mode, resets the displays, and returns
to the Precor banner.
Note: The factory setting for Pause mode is 2 minutes (120 seconds). The club
has the option to change the setting. A duration can be set between 1 and 120
seconds and limits how long a user can pause his or her workout. Refer to
Club Information on page 16.
In Cool down,
mode
This is what happens...,
no pedaling
is detected.
Enter Cool-down, Pause mode. Time stops accruing, but
the display features remain, so you can review your workout
statistics. Note that the Pause mode has a time limit and
the club has the option to determine the setting. If you
enter Pause mode, it is of limited duration. Check with club
personnel or refer to
Club Information on page 16.
you press Reset Exits Cool-down and returns to the Precor banner.
it ends.
Displays the FINAL banner.
At FINAL
banner, you
This is what happens,...
press Reset
Returns to the Precor banner.
Time out
When you complete the 5-minute cool down period, the
FINAL banner appears. Workout statistics except TIME,
STRIDES and CALORIES reset to zero. (Note that the TIME
display shows the accumulated workout time including
warm-up and cool down periods.) You are given 2 minutes
to review your workout statistics before the display auto-
matically resets to the Precor banner. You can also press
Reset, to return to the Precor banner.