Polaroid P75 User Manual
Page 16
2.6
C
C -- C
CA
AR
RD
D T
TH
HIIC
CK
KN
NEESSSS C
CO
ON
NT
TR
RO
OLL LLEEV
VEER
R
This item is operated by the user to prevent
more than one card feeding into the printer
at the same time and causing a jam.
D
D -- C
CA
AR
RD
D O
OU
UT
TP
PU
UT
T H
HO
OP
PP
PEER
R
For collecting printed cards.
Install Card Output Hopper onto printer by
hooking over bottom edge of card exit
aperture.
C
Caarrd
d tth
hiicckkn
neessss::
A - 60mil (1.524mm) to 50mil (1.27mm)
B - 40mil (1.016mm)
C - 30mil (0.762mm)
D - 20mil (0.508mm)
E* - Less than 20mil (0.508mm)
* Start at lowest position and move lever up to
match card thickness.
For other card thickness, start lever at lowest
position and move up until cards feed.
Open Cover, and adjust lever to correct
position. Repeat for different card thickness.
(Factory setting is for 30mil (0.762 mm) card
thickness. See diagram below :