Polaroid P75 - Manual (Page 41)

B.2
MEDIA LOADING ORIENTATION
Position the cards with the Smart Card Chip at the
top of the card and facing away from the printer.
SMART CARD CONTACT STATION
INTERFACE
When a command to the parallel printer interface
sends a card to the Smart Card Contact Station,
the printer connects the Smart Card Contact
Station to the female DB-9 connector on the rear
of the printer.
An attached external Smart Card Programmer can
be used to program Smart Card chips.
DO NOT position printing over the Smart Card
Chip.
7
8
DB - 9
PINS
6
9
C7 (I/O)
C8 (RFU)
SMART CARD
CONTACT POINTS
C6 (Vpp)
(GND when chip is at
station)
C2 (Reset)
C3 (Clock)
SMART CARD
CONTACT POINTS
CI (Vcc)
C4 (RFU)
C5 (GND)
2
3
DB - 9
PINS
1
4
5
Refer to the Card Printer Programmer's Manual for complete programming information.