Panasonic WV-CS854B User Manual

Page 8

Advertising
background image

-8-

9. Do not operate the camera beyond the specified

temperature, humidity or power source ratings.
Do not use the camera in an extreme environment
where high temperature or high humidity exists. Do
not place the camera near heat sources such as
radiators, stoves or other units that produce heat.
Use the camera under conditions where
temperature is between –10 °C - +50 °C (14 °F -
122 °F), preferably +40 °C (104 °F)], and humidity is
below 90 %.
The input power source is 24 V AC 60 Hz.

10. Do not install the camera near the air outlet of an

air conditioner.
The lens may become cloudy due to condensation
if the camera is used under the following
conditions.

• Rapid temperature fluctuations by switching the air

conditioner on and off.

• Rapid temperature fluctuations due to frequent door

opening and closing.

• Use in an environment where eyeglasses become

foggy.

• Use in a room filled with cigarette smoke or dust.

If the lens becomes cloudy due to condensation,
remove the dome cover and wipe all moist surfaces
with a soft cloth.

11. Consumables

Parts having contacts such as the lens-drive
motors, cooling fan motor and slip-rings inside the
camera are subject to wear with time. Please ask
the nearest service center about replacement and
maintenance of such parts.

12. Do not aim the camera at the same object for a

long time.
Burn-in of an image may be caused on the
fluorescent screen of CRT.

13. Self-diagnosis Function

If the camera continues operating abnormally for 30
seconds or more due to such an accident as
external noise, the camera will automatically reset
its power. In the case it happens frequently, check
if there would be any environmental cause.

14. Prevention of blooming and smear

When the camera is aimed at a bright light source,
such as a spotlight, or a surface that reflects bright
light, smear or blooming may appear. Therefore,
the camera should be operated carefully in the
vicinity of extremely bright objects to avoid smear
or blooming.

* Matsushita Electric Industrial Co., Ltd. herewith

declares that it will not be liable for any damage,
whether direct or indirect, caused by using the
product for business transaction or security, or
malfunctioning of this product.

;

;

;

;

;

;

Bright object

Smear

Advertising