Planon System Solutions PRINTSTIK 900 series - Manual (Page 34)

12. Check the BlackBerry phone to make sure it is back to normal status.
If not, please allow some time for it to be back in normal status (This
should only take a few minutes).
13. After the installation, the phone should be checked for the following
applications modules:
“PrinterDriver settingManger”
“PRINTSTIKDriver”
“BlackBerry FileExplorer”
14. Configure the PrinterDriver.
Click on the “PrinterDriver settingManager” icon and set the
following parameters:
-Print Margin Setting: Leave default settings
-Print Mode Setting: Choose from Small, Normal and High Quality
-Font Style Setting: Should be set to Default font
-Save Paper Setting: Choose from Print Only Printable, Remove
White Space, and Print full page.
-Reload Hooks – if print item is no longer in menu: see FAQ #15.
-Image Resolution Setting: default is set to 800 x 600
& Maximum is set to 1600 x 1200.
15. Now click on the “PRINTSTIKDriver” icon that will install the
driver (you will not see any message).
34