Planon System Solutions PRINTSTIK 900 series - Manual (Page 7)

C
HARGING YOUR
PRINTSTIK
Electrical Connectivity
The PRINTSTIK has an internal rechargeable battery. This gives the
mobility to print without any connection to an external power source. The
PRINTSTIK can only function if the battery has a charge. There are two
main options to how it can be charged discussed below:
Connecting to an AC Outlet
The PRINTSTIK has the ability to connect
to a typical wall outlet (AC) via the
included wall charger. When connected
the PRINTSTIK battery symbol light will
turn RED. This light will stay red as the
printer charges (see page 9 for more
information). This signifies the charging
of the PRINTSTIK. It takes 3 hours for a
full charge.
Connecting to a DC Outlet
The PRINTSTIK has the ability to charge
through the PRINTSTIK’s car charger. This
can be done by connecting the PRINSTIK’s car
charger to the car lighter.
Connecting to a PC USB port
The PRINTSTIK has the ability to charge through
the USB port on your personal computer. To do
so simply connect your PRINTSTIK USB cable
from your PRINTSTIK to the USB port on your
PC. It will take 4 hours to fully charge.
7