Planon System Solutions PRINTSTIK 900 series - Manual (Page 8)

PRINTSTIK Main Hardware Control Panel
Data Stream
Power Button
This button can turn the PRINTSTIK on or off. Turning the
PRINTSTIK on requires holding the button down for three seconds. After
this brief period the button can be released. At this point, the “Battery Life
Light” and “Data Stream” will light up signifying the PRINTSTIK is on
and operational.
When turning PRINTSTIK off, the power button would need to be
pressed down firmly for another three seconds. Once the button is released,
the “Data Stream Light” and “Battery Life Light” should both be turned
off signifying the PRINTSTIK is off.
8
Power Button
Paper Feed Button
Printing Status
Battery Life
Power Button