Panasonic KX-FL501NZ - Manual (Page 17)

17
Setup
Recording paper !
Note for recording paper:
● Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or
paper used for resumes.
● Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
● Avoid extremely smooth or shiny paper that is highly textured.
● Avoid paper that is coated, damaged or wrinkled.
Note:
● Avoid double-sided printing.
● Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the
paper may jam.
● Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the
print quality.
1 Fan the stack of paper to prevent a paper
jam.
2 Insert the paper into the recording paper
entrance.
● The paper should not be over the tab.
● If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Tab
Recording
paper
entrance
Printing side
is back.
Stack of
paper
Correct Incorrect
Adding paper
1. Remove all of the installed paper.
2. Add paper to the removed paper and straighten.
3. Fan the stack of paper.
4. Insert the paper into the recording paper entrance.
A4 size recording paper can be loaded. The unit can hold up to 150 sheets of 60 g /m 2 to 75 g /m 2
paper or 120 sheets of 90 g /m 2 paper.