Panasonic MW-10 - Manual (Page 13)

13
RQT9522
Operations
Memorizing broadcast stations to listen (Preset
Tuning)
Memorizing broadcast stations
Up to 30 FM stations and 15 AM stations can be memorized.
2 methods are available for this.
Auto Memory
Memorizing broadcast
stations automatically,
starting with the
frequency memorized
fi rst and memorizing
the upper stations.
You can select either the
minimum frequency level or any
frequency level as a memory
starting position.
1. Press [FM] or [AM].
To start memorizing from
an arbitrary frequency,
adjust to the frequency level
beforehand.
2. Press [PROGRAM].
3. Press [e, r] to select the
“Auto Memory” and press
[OK].
4. Press [e, r] to select the
“Minimum Frequency” or
“Current Frequency” and
press [OK].
The Auto memory starts.
When it fi nishes, the unit
receives the broadcast station
last memorized.
•
Registering preset
channels
Memorizing your
favorite broadcast
stations manually
1. Receive the broadcast
station to memorize. (¼P12)
The monaural setting
(¼right) can be registered
for FM.
2. Press [PROGRAM].
3. Press [e, r] to select
“Register/Delete Preset” and
press [OK].
4. Press [e, r] to select the
channel and press [OK].
•
Listening to the channel memorized
beforehand
Preset Tuning
1. Press [FM] or [AM].
2. Press [PLAY MODE] to
select “Preset Tuning”.
3. Press [u/t, y/i] to
select the channel.
You can also select with the
numbered buttons.
Also, you can press
[SELECT TRACKS], press
[e, r] to select the channel
and press [OK]. •
•
„
„
To cancel the memorized broadcast stations
1. Press [PROGRAM].
2. Press [e, r] to select “Register/Delete Preset” and press
[OK].
3. Press [e, r] to select the channel to delete and press
[DEL].
The message for deletion appears.
If noise is excessive when receiving FM stereo
signals
1. Press and hold [PLAY MODE] approx. 2 seconds or more
to select “Mono”.
Each time you press and hold
Auto (Stereo) Mono
“Mono” is displayed.
When the reception frequency is changed with the manual
tuning, the setting returns to “Auto (Stereo)”. Normally, set
“Auto (Stereo)”.
If noise is excessive when receiving AM
broadcast signals (BP: Beat-proof)
1. Press [PROGRAM].
2. Press [e, r] to select “Beat-proof”.
3. Press [w, q] to select the least noisy setting among “BP1”
to “BP4”.
4. Press [ RETURN] to return to the standard screen.
Keep distance as far as possible among the AM loop
antenna, AC adaptor and the main unit.
When radio reception is poor
Use an outdoor antenna if radio reception is poor.
FM outdoor antenna (using a television antenna)
Remove the included FM indoor antenna.
Connect a coaxial cable (commercially available) (A) to
the FM antenna terminal (B) of this unit and TV antenna
terminal (Type F) (C).
A
B
C
If the reception is still poor with the above connection,
an FM dedicated antenna (commercially available) or
a booster (amplifi er, commercially available) may be
necessary. Consult your dealer for details.
„
•
„
•
„
•
„
Listening to an iP
od / Listening to the radio