Panasonic DIGA DMR-EZ27 - Manual (Page 9)

9
RQT8851
Basic Operations
Scheduled Recording
Refer to “Advanced Scheduled Recording” ( ➔ 16) for detailed information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
• RAM If the disc is protected, release protection ( ➔ 44).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit’s display is set to the correct time.
• If connected via a cable box or satellite receiver, set channel on those
equipment before scheduled recording starts.
to select the DVD drive.
CANCEL S SUB MENU Timer Off A
Schedule List Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Channel No
Press ENTER to set new schedule.
Date On
New Scheduled Recording
Off Mode Check
ENTER
e, r to select “New Scheduled Recording”, then
w, q to move through the items and e, r to set
the items.
Channel/Input – TV Station/External Input
Date/Frequency – You can set a daily or weekly program.
On (start time) / Off (end time)
– Hold button to change in 30-minute increments.
Mode – Recording mode
Name – Press [ENTER], see page 28.
Channel, Caption
Preview of selected
channel
SCHEDULED
RECORDING
Channel/
Input
Date/
Frequency
--------
On
--:-- --
Off
--:-- --
Mode
--
ENTER
Name
Number -- 0 9
4-1
4-1 KPO-SD
Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Cancel
Set Channel/Input.
Repeat steps 3−5 to program other recordings. –
when you have finished programming.
“z” lights on the unit’s display.
Scheduled recording can be started only when the unit is turned off. –
–
Notes
Be sure to perform step 6 before the
scheduled recording time. When the
unit is turned off, “z” lights on the unit’s
display to indicate scheduled recording
standby has been activated.
“z” flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
If two scheduled recording times
overlap, the first recording always has
priority. The second recording will start
only after the first recording has finished.
When starting time for a scheduled
recording is the same, the recording that
you programmed later has priority.
If you set DST (Daylight Saving Time)
to On when manually setting the clock,
scheduled recording may be affected
when summer time switches to winter
time and vice versa. •
•
•
•
•
•
Tips
Icons such as “ RAM ” indicate usable
discs. Refer to pages 62 and 63.
•