Getting started, Finding the correct viewing channel, Setting the speakers – PYLE Audio HTS8100 User Manual

Page 20

Advertising
background image

20

English

Finding the correct viewing
channel

Before you start ...
Remove the door stop tag on top of the
disc compartment door.

A

Press SOURCE button on the main unit

until ‘DISC SOURCE’ appears on the
display panel (or DISC on the remote
control).

B

Turn on the TV and switch it to the

correct video-in channel.

You may go to the lowest channel on

your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.

You may press ° button repeatedly

on your TVs remote control.

Usually this channel is between the

lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..

Refer to your TVs user manual on

how to select the correct input on your
TV.

The fi rst screen appears on TV
When you complete the connections and
turn on this unit to the ‘DISC SOURCE’
mode for the fi rst time, you see the
welcome message on the TV.

The next few steps will help you set up your

Ambisound home theater system to match your

listening environment.

Stop: Exit

Continue

Welcome

It is advisable that you make several basic
settings to optimise the performance of
this unit. See the following pages for
more information.

Getting Started

Setting the speakers

There are four parameters to adjust the
speakers: room acoustics, placement,
height and distance. Change the speaker
settings according to your room
environment and setup.

A

Upon seeing the welcome message in

‘DISC SOURCE’ mode, press cursor right
key on the remote control to access the
speaker setup screen.

A message on the unit positioning

appears.

Ensure that the SoundBar system is always

directly facing you in your listening area.

ds

Continue

Orientation

B

Press cursor right key to continue.

{ Room Acoustics } menu appears.

Select

Back

Change

Please select the type of walls that surround

your room:

Hard (Concrete, wood)

Soft (Curtains, open space)

ds

Room Acoustics

C

Select the condition of the room and

press cursor right key to confi rm.

{ Hard } for concrete or wood

surroundings.

{ Soft } for curtains or an open space

surroundings.

Advertising