Plus Corporation COPYBOARD M-115 - Manual (Page 17)

E-17
Setting the Time
Number of Copies
Print
Save
Feed/Stop
Color Density
Reprint
MEMORY
ON/
Standby
The clock of the copyboard should be set correctly because the date and time (timestamp) is printed on the
printer paper, and it is also recorded in the file information when saving.
Press the ON/Standby button to switch on
the power.
The LED of the display window will light and the power will
be switched on.
Press the ON/Standby button while holding
down the Density button to switch to “Time
setting”
The LED of the display window will light and display “ ”.
ON/
Standby
Density
ON/
Standby
Preparation:
Connect the AC power adapter to the copyboard. See Page E-16.
Example: Set the time to 2:16 pm, November 8, 2006 (2006.11.08 14:16).
Overview of the Operation
1 Switch to “Time setting”
Press the ON/Standby button while holding down the Density button.
2 Display the day and hour setting mode
Setting mode information indicated in the display window
(First 2 digits) (Last 2 digits)
Year Month Day Hour Minute
3 Set the date and time of the setting mode
One press of the + or the − button will enable the settings to be made.
Press the + or − button and make the adjustment.
4 Press the Print button to finalize
There is a change to the next setting mode.
Repeat steps 3 and 4 to set the current time.
5 Completion
If the Print button is pressed after setting the minutes setting mode (“c6” dis-
played), the time setting mode is quit.
• Pressing the ON/Standby
button during operations 2 to 4 will cancel the
incomplete settings and return to the time prior to starting the settings.