Plus Corporation COPYBOARD M-115 - Manual (Page 22)

E-22
Feed/Stop
Selecting the printing density
Select this when the density of the print is light.
Press the Density button and select darker or standard.
Making additional copies
This will print the copy of the sheet that was scrolled previously one more
time.
Press the Reprint button.
This starts the printing of the image data that has accumulated in internal
memory.
Note
• The sheet is not scrolled when additional copies are made.
• The number of copies can be changed. To do so, make the change before
pressing the Reprint button.
• In repeat printing, the color/black & white and density settings will be the
same as those of the prior printing.
• When printing or USB memory storage has not been performed since
switching on the power, image data will not have accumulated in the inter-
nal memory and this operation will not be possible.
Cancellation of the print operation in progress
During the read operation (when the Print button was pressed)
When the Feed/Stop button (for model M-115, the ON/Standby button)
is pressed, the reading of the sheet stops (for model M-115, the copyboard
returns to the original page), and the partially read image data is printed. Wait
until the sheet is expelled from the printer.
Stopping the printing after the Print button was pressed and the read-
ing completed
Stopping the process when multiple copies are being made when mak-
ing additional copies (When the Reprint
button has been pressed)
Press the copyboard’s ON/Standby button. After several seconds, printing
is interrupted and the sheet is expelled.
Density mode lamp
Lit Darker
Unlit Standard
Density
Reprint
Screen Reprint
Page
Number of Copies
Print
Save
Feed/Stop
Color Density
Reprint
MEMORY
ON/
Standby
M-11S/M-11W
M-115
Printing
ON/
Standby