Panasonic DMP-BD35 - Manual (Page 13)

13
RQT9248
Basic play (Playing video contents)
Instructions for operations are generally described using the remote control in these operating instructions.
Preparation
Turn on the television and select the appropriate video input on the television.
AV1
OPTION
VOL
RE-MASTER
SKIP SLOW/SEARCH
STATUS FUNCTIONS
A B C D
RETURN
AUDIO
MUTING
PO
P-UP MENU
PLAY PAUSE STOP
CANCEL
PIP SECONDARY
AUDIO BD/SD
SETUP
DI
RE
CT
N
AV
IG
AT
OR
OK
RECEIVER
CH VOL
OPEN/CLOSE
TO
P
M
E
N
U D
IS
P
LA
Y

 AV



1 Press [ Í BD] to turn on the unit.
2 Press [ < OPEN/CLOSE] to open the disc tray and load
the disc.
≥Load double-sided discs so the label for the side
you want to play is facing up.
≥DVD-RAM: Remove discs from their cartridges
before use.
≥Press the button again to close the tray.
Play starts.
≥If a disc with data in different file formats is inserted, the file selection
menu is displayed. Press [ 3, 4] to select the desired file format and
press [OK].
≥If play does not start, press [1] (PLAY).
≥If the menu is displayed, press [3, 4, 2, 1] to select the item and press
[OK].
≥If the screen prompting you to use the color buttons appears, continue to
operate with the color buttons on the remote control.
NOTE
TIPS
≥Signal from PAL discs is output as PAL. Signal
from NTSC discs is output as “NTSC” or “PAL60”.
You can select “NTSC” or “PAL60” in “NTSC
Contents Output” for NTSC discs. (
> 24)
≥DISCS CONTINUE TO ROTATE WHILE MENUS
ARE DISPLAYED. Press [ ∫] when you have
finished playback to protect the unit’s motor, your
television screen and so on.
To switch drives
Press [BD/SD] to select “BD” to play a disc.
≥If a disc or an SD card is inserted while the unit is
stopped, the drive switches automatically
depending on the inserted media.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V]
Press [TOP MENU/DIRECT NAVIGATOR].
To show Pop-up menu [BD-V]
The Pop-up menu is a special feature available with
some BD-Video discs. This menu may vary with
discs. For the operating method, refer to the
instructions for the disc.
1) Press [POP-UP MENU].
2) Press [
3, 4, 2, 1] to select the item and
press [OK].
≥Pop-up menu also appears by pressing [OPTION]
and selecting “Pop-up Menu”.
≥Press [POP-UP MENU] to exit the screen.
≥The producers of the disc can control how discs
are played. So you may not always be able to
control play as described in these operating
instructions. Read the disc’s instructions carefully.
≥When playing a set of two or more BD-Video
discs, the menu screen may continue to display
even if the disc has been ejected.
≥It may take time to read BD-Video discs that
include BD-J ( > 34).
TIPS
≥You can play data in AVCHD format recorded on
an SD card.
e.g.,
e.g., [BD-V] e.g., [DVD-VR]
1
2
3
4
5
DIRECT NAVIGATOR Title View
Video Picture

01
02
03
04
05
06
07
08
09
10 05.09
05.09
05.09
06.09
06.09
06.09
07.09
07.09
07.09
07.09 Wed
Wed
Wed
Thu
Thu
Thu
Fri
Fri
Fri
Fri
IN 2
IN 2
VHS
VHS
IN 2
IN 2
10:00
11:30
11:59
10:00
11:30
11:59
10:00
10:30
11:30
11:59
Rec Time
No. Date Day Tuning Time Name of item
DVD-RAM(VR)
  Play Previous Next
RETURN OPTION Video Picture
Page 01/02
0:15 (SP)
P
lay
b
a
ck
Ge
tti
ng s
ta
rte
d
DMP-BD35GT&GN-RQT9256_eng.book 13 ページ ２００８年９月２４日 水曜日 午後５時５分