Panasonic DMP-BD35 - Manual (Page 28)

28
RQT9248
Frequently asked questions
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥Image disturbance during search.
To reset this unit Page
Setup Page
What do I need to play multi channel
surround sound? ≥Connect the appropriate amplifier/receiver to the HDMI terminal, the DIGITAL AUDIO
OUT terminal (OPTICAL) on this unit.
7, 8
How do I set this unit to play 7.1ch
surround sound? ≥After connecting this unit to an amplifier/receiver with 7.1ch speaker and setting
“BD-Video Secondary Audio” to “Off”, set the items in the Setup menu as follows.
– When connecting to an amplifier/receiver supporting HDMI (High Bit rate Audio) using
a High Speed HDMI cable
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”: “Bitstream” or “PCM”
25
Can headphones and speakers be
directly connected to this unit? ≥You cannot directly connect them to this unit. Connect through the amplifier/receiver,
etc.
7, 8
My television has COMPONENT
VIDEO IN terminals and HDMI IN
terminal. Which should I connect
with? ≥The different levels of picture quality input are listed below in order from highest to
lowest.
HDMI IN
)COMPONENT VIDEO IN )VIDEO IN. However, it will take longer for the
picture output to start up when this unit is connected with the HDMI IN terminal.
—
Disc
Can I play BD-Video and DVD-Video
bought in another country? ≥You cannot play:
– BD-Video discs that do not include your region code.
– DVD-Video discs that do not include your region number or “ALL”.
Refer to the cover of these operating instructions for more information about your region
code and number.
Refer to the disc’s jacket for more information.
Cover
Can BD-Video/DVD-Video that does
not have a region code/number be
played? ≥The region management information for BD-Video/DVD-Video indicates that the disc
conforms to industry standards. You cannot play discs that do not conform to industry
standards or do not have a region code or number.
—
Please tell me about disc
compatibility with this unit. ≥Refer to “Disc and card information” and “About MP3/JPEG files”.
≥You cannot write to a disc with this unit.
4, 20
—
SD card
What kinds of operations are
available on the SD card slot on this
unit? ≥The following operations are available.
– Play back JPEG data recorded with a digital camera etc.
– Play back AVCHD motion pictures recorded with Panasonic High Definition Video
Camera
≥If a BD-Video disc supporting BD-Live or BONUSVIEW is used, it is possible to copy
secondary video, etc. from the Internet or disc to the card and play it back together with
the images on the disc, etc.
—
—
15
What kinds of cards can be used? ≥SD Memory Cards (from 8 MB to 2 GB), SDHC Memory Cards (from 4 GB to 32 GB),
miniSD Cards § , and microSD Cards § can be used.
§ A miniSD Card and a microSD Card must be used in the adaptor included with the
memory card.
Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only.)
≥[BD-V] To play the virtual package, it is recommended that you use a card that supports
SD Speed Class Rating Class 2 and has 1 GB or more free space.
5
—
To restore the unit if it freezes
due to one of the safety
devices being activated ≥Press and hold [Í/I] on the main unit for 3 seconds. (The settings remain unchanged.) —
To return all settings other than
some settings to the factory
preset ≥Select “Yes” in “Default Settings” in the Setup menu.
This returns all values in the Setup menu and the on-screen menu, except for “Remote
Control”, “IP Address / DNS Settings”, “Proxy Server Settings”, “DVD-Video Ratings” and
“BD-Video Ratings” to the default settings.
27
To return to the factory preset
(No setting) ≥Reset the unit as follows:
1 Press [ Í/I] on the unit to turn off the unit.
2 Press and hold [ ;] and press [Í/I] and [< OPEN/CLOSE] on the unit at the same time
for more than 5 seconds until “HELLO” is displayed on the unit.
3 The power is turned on and then turned off automatically.
—
DMP-BD35GT&GN-RQT9256_eng.book 28 ページ ２００８年９月２４日 水曜日 午後５時５分