Piega P Sub 4 - Manual (Page 5)

Procedure:
>Before unpacking, remove any jewelry such as watches, rings,
bracelets etc. in order to avoid scratching the aluminum
>Open the carton as shown in the figure and remove the supply
cable and spikes provided. Leave the protective cushion
>Carefully invert the subwoofer 180° with the carton open and
stand it on the protective cushion so that the carton can be
lifted up and off the loudspeaker
>Remove the protective foil and the upper protective cushion
and by hand fit the spikes supplied
>Turn the subwoofer over 180° once more and stand it on
the spikes. To ensure trouble-free operation of the P SUB 4
the spikes must be screwed in...!
>Check that the P SUB 4 has not been damaged in transit.
>Then place the P SUB 4 in the required position
Special care was taken in the packaging of your P SUB 4 in order to ensure that this new PIEGA quality product reaches your living
room safely and undamaged. In order to avoid any damage when unpacking the loudspeaker, follow closely the instructions below.
PIEGA P SUB 4
Instructions for unpacking...
Unpacking the P SUB 4
5
Warning:
The P SUB 4 subwoofer is an active subwoofer with a bass reflex system.
>Ensure that the bass reflex port is not blocked...!