Planet Technology VIP-280 - Manual (Page 18)

VoIP Call Out
This page defines the routing rule for Call out to VoIP. (User key in the phone number through phone
set dial pad, then VoIP router translate the phone number by the routing table setting here to
destination IP, and dial out number then call out via network protocol).
Each time when you off hook the phone connected to this VoIP router, you will hear a dial tone to
remind you to key in the phone number, after you input the number you called, if digits of the number of
you called is not exceed the Max Digits, please remember to press the # key for ending the input.
Parameter Description
MaxDigits
Define the maximum digits wait for user key in for all VoIP Call Out, if
user key in digits match the number defined here. It will go to translate
for call out rule without needed to press # key.
FirstDigitTime
Define the waiting seconds for user key in phone number first digit. User
need to key in first digits before the seconds defined here, if VoIP router
wait over the defined seconds and there is no any digits key in, the VoIP
router will feedback the user busy tone.
OtherDigitTime
Define the waiting seconds for user key in phone number secondary &
the rest digits. User need to key in the rest digits before the seconds
defined here, if VoIP router wait over the defined seconds and there is
no any digits key in, the VoIP router will feedback the user busy tone.
Remark
Remark for this routing rule. Please use UNDERLINE to replace the
SPACE due to HTTP protocol limitation.
Area Code Define the Prefix number fit this rule, any phone number prefix digits
18