Planet Technology VIP-280 - Manual (Page 22)

22
call will ring the dedicate phone line that assigned with matched number.
Server
Assign which server to authorize this incoming VoIP call before call out.
For example, if the dial number should be checked by server 1 setting
on the “Regster Server” menu (Please refer to the “VoIP Config
Register Sever”).
ANS
When the call is coming , Before or After to pick up the phone , the
Server should check that has the speaker got authorization from
Register Server ?
After：setting on After function , when the call is coming, Server will ring
at first, when user pick up the phone, then Server will go to Register
Server for checking caller-authorization, if the authorization has
confirmed, then the connection will start to success, otherwise it will sent
busy tone.
Before：setting on Before function , when the call is coming, at fist
Server will go to Register Server to check that has the speaker got
authorization? If the authorization has confirmed, then Server start to
ring, otherwise it will send busy tine.
Alert
Control the Ring Back tone generate timing:
Mode 0: When this VoIP ruter get ring back tone from phone line, it will
send the ring Alert signal to remote VoIP router for generate ring back
tone.
Mode 1: Before this VoIP router dial to phone line, it will send the ring
Alert signal to remote VoIP router for generate ring back tone.
Mode 2: After this VoIP router finish dial out number to phone line, it will
send Connect OK signal to remote VoIP router.
Mode 3: Before this VoIP router dial to phone line, it will send the ring
Alert signal to remote VoIP router for generate ring back tone, after this
VoIP router finish dial out number to phone line, it will send Connect OK
signal to remote VoIP router.
Profile
Define the optional special VoIP parameters when received on this
destination. Please input the name you defined on the profile list (Please
refer to the “VoIP Config Call Routoing Call Setup”).
Forward
Define the profile name for forward the unanswerable VoIP call on this
call in rule. Please input the name you defined on the “Forward” profile
list.
Delete
Delete this rule item on routing table.
To add new rule item on routing table, please assign the item number
you want to insert before, input AREA CODE then press ADD button to
add it on the list. Then modify the necessary information on the routing
table list.