Planet Technology VIP-280 - Manual (Page 39)

STEP 2:
Select VoIP Call Out in the Call Routing menu; insert the values of the index number, Area
Code and IP Address on the VoIP call out routing table for outgoing calls. The sample
configuration screen is shown below.
When the calling party is an H.323 device, please add
a ”h323:” in front of the IP address.
Such as: the destination H.323 device is 172.16.0.100, then
input “h323:172.16.0.100” in the IP address column of
VIP-320/VIP-280 VoIP Callout setting page
When the calling party is a SIP device, please add a “sip:”
in front of the IP address.
Such as: the destination SIP device is 172.16.0.200, then
input “sip:172.16.0.200” in the IP address field.
L
Hint
STEP 3:
After the settings for the remote calling party, you may dial number 1001 to connect to the
H.323 IP phone, and number 2001 to connect to the SIP IP phone.
If you’re using the VIP-280, you may dial or receive the
H.323 and the SIP calls at the same time.
L
Hint
39