Pioneer VSX-919AH-K - Manual (Page 78)

The Advanced MCACC menu 10
78
En
Automatic MCACC (Expert)
If your setup requires more detailed settings
than those provided in
Automatically setting up
for surround sound (Auto MCACC) on page 37,
you can customize your setup options below.
You can calibrate your system differently for up
to six different MCACC presets
1 , which are
useful if you have different listening positions
depending on the type of source (for example,
watching movies from a sofa, or playing a video
game close to the TV).
2
Important
• Make sure the microphone/speakers are
not moved during the Auto MCACC Setup.
• Using the Auto MCACC Setup will
overwrite any existing settings for the
MCACC preset you select.
3
• The screen saver will automatically appear
after five minutes of inactivity.
CAUTION
• The test tones used in the Auto MCACC
Setup are output at high volume.
THX
®
THX is a trademark of THX Ltd., which may be
registered in some jurisdictions. All rights
reserved.
1 Select ‘Auto MCACC’ from the Advanced
MCACC menu, then press ENTER.
If the
Advanced MCACC screen is not
displayed, refer to Making receiver settings from
the Advanced MCACC menu on page 77.
2 Select the parameters you want to set.
Use
/ to select the item, then use / to
set.
Note
1 These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management
on page 91.
2 You may also want to have separate calibration settings for the same listening position, depending on how you’re
using your system.
3 Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
1.Advanced MCACC
A/V RECEIVER
Exit Return
ALL
1b.Auto MCACC
START
Exit
A/V RECEIVER
Return
Speaker Setting
Channel Level
Speaker Distance
EQ Pro & S-Wave
SYMMETRY : M1.MEMORY 1
ALL CH ADJ : M2.MEMORY 2
FRONT ALIGH : M3.MEMORY 3
THX Speaker :
NO
ALL
1b.Auto MCACC
START
Exit
A/V RECEIVER
Return
Speaker Setting
Channel Level
Speaker Distance
EQ Pro & S-Wave
SYMMETRY : M1.MEMORY 1
ALL CH ADJ : M2.MEMORY 2
FRONT ALIGH : M3.MEMORY 3
THX Speaker :
NO
ALL
SYMMETRY : M1.MEMORY 1
1b.Auto MCACC
ALL CH ADJ : M2.MEMORY 2
FRONT ALIGH : M3.MEMORY 3
START
A/V RECEIVER
Exit Return
Speaker Setting
Channel Level
Speaker Distance
EQ Pro & S-Wave
THX Speaker : NO
VSX-1019_KU.book Page 78 Thursday, January 8, 2009 12:01 PM