Hyundai HGC-300 - Manual (Page 13)

[18] [19]
BASIC FUNCTIONS
Displays the number of missed
calls and the time the call was
missed.
l The message will be
cleared when you press
the [ ] or [ ] key.
1
MISSED CALL DISPLAY
Adjust volume by using the volume control keys
during the following operation.
l During a Call : Earpiece volume adjustment.
l Standby Status : Ringer volume adjustment.
l When the Phone Rings : Ringer volume
adjustment.
l Call status in hands-free : Hands-free volume
adjustment. Press [ ] when the phone
rings and it will mute the ringer.
1
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
BASIC FUNCTIONS
When there is an incoming call, the caller’s phone number is dis-
played on the screen.
This function notifies you that there is an incom-
ing call when you are on the phone.
When phone rings or LED blinks, press any key
except Volume Up or Volume Down.
To end the call, press [ ].
l To answer the call, press [ ]
when you hear the beep.
l To switch back to the first caller,
press [ ] again.
1
1
HOW TO ANSWER CALLS
2
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 33)
VIBRATE
CALLER ID FUNCTION
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
MISSED CALLS
XX
XX:XX PM
XXX-XXX-XXXX
This function disables the ringer and vibrates the phone any
time an incoming call is in process. To enable this function
press [ ], [3],[1] and select VIBRATE by using the [ ]
and [ ] key or by pressing the “up”and “down”keys at
the left upper side of the phone.
HGC-300E(hojoo)10/26 2001.7.27 6:18 PM Page 24