Hyundai HGC-300 - Manual (Page 27)

[47]
HOW TO CHANGE LOCK CODE
Press [ ], then [0], then enter [PASSWORD],
then [2] .
l The default lock code is ‘0000’.
Enter new 4-digit “PASSWORD”. Press [ ].
Re-enter the new “PASSWORD”. Press [ ].
1
LOCK CODE CHANGE
2
3
This function is used to change the 4-digit lock code.
[46]
HOW TO LOCK YOUR PHONE
Press [ ], then [0], then
enter [PASSWORD], then [1].
l The default password is ‘0000’.
Select the parameter (OFF, POWER ON, ON )
by using the scroll keys. Press [ ].
l “POWER ON?” locks the handset upon pow-
ering on the handset each time.
l “OFF?” unlocks the handset and leaves it
unlocked.
1
AUTO LOCK
This function prevents any other person from using the handset with-
out permission. When it is locked, the handset can not make any calls
or use any other function.
2
Incoming calls, emergency dialing and alarm functions
are enabled when the handset is locked.
AUTO LOCK?
੬ ON
SEL PREV
HGC-300E(hojoo)10/26 2001.7.27 6:18 PM Page 52