Hyundai H-CMD4012 - Manual (Page 17)

17
Radio operation
This unit is equipped with a touch screen. To perform various operations you can use buttons on the RC, on the
front panel as well as screen touchable buttons. When you switch on the unit, it automatically enters RADIO
mode. When you are in the source menu, press RADIO screen button, POWER/SRC button on the unit or
MODE button on the RC to select RADIO mode. Press arrow symbol in the right upper corner to return to
source menu. (The left screen below is active when RDS is ON in the general setup).
Band selection
Press repeatedly BAND button on the unit or BND/TA/SYS buttons on the RC to select FM1, FM2, FM3,
AM1, AM2. The display will show the wave band, frequency and preset station number if already stored. To
select a band you can also press BND button on the touchable screen.
Manual/Automatic tuning
Manual tuning: Press SEEK+/SEEK- buttons on the RC or correspondent buttons on the screen to select a
station upward or downward step by step.
Automatic tuning: Press and hold for 3 seconds SEEK+/SEEK- buttons on the RC or correspondent
buttons on the screen, the automatic search will start. It will play when finds the station.