Hyundai H-CMD4012 - Manual (Page 34)

34
Audio setup
Audio out
SPID/OFF: There is no signal output from the coaxial or optical
output end.
SPDIF/RAW: When the unit is connected with the amplifier by
coaxial or optical connecter, please select this mode.
SPDIF/PCM: When the unit is connected with the two channels
digital stereo amplifier, please select this mode.
Video setup
Brightness, Contrast, Hue, Saturation, Sharpness
You can set the Brightness, Contrast, Hue, Saturation, Sharpness
according to your preference.
Speaker setup
LT/RT: The audio out is Left and Right channels format even if the
original sound is 5.1CH format.
Stereo: The audio out format is stereo even if the original sound is
5.1CH format.
VSS: The audio format Advanced Virtual Surround Sound