Hyundai H-CMD4012 - Manual (Page 6)

6
Installation method 2:
Using the screw holes at the sides of the unit.
(rear mounting bolt not included)
Select a position where the screw holes of the mounting
bracket supplied with the car and the screw holes of the
main unit become aligned, tighten the screws on each
side, and remount the brackets with the factory hardware
in the original location.
Unit removal
1. Detach the front panel.
2. Insert the keys supplied with the unit on both sides (as illustrated) as this will release the internal locks so
you can slide the unit out.