Pioneer VSX-AX10Ai-G - Manual (Page 20)

Connecting your equipment 02
20
En
Using the component video jacks
Component video should deliver superior picture quality
when compared to composite or S-video. A further
advantage (if your source and TV are both compatible) is
progressive-scan video, which delivers a very stable,
flicker-free picture. See the manuals that came with your
TV and source component to check whether they are
compatible with progressive-scan video. Note that it is
not possible to see overlay information when you have
connected using component video cables.
1 Connect the component video outputs of your
source to a set of component video inputs on this
receiver.
There are three component video inputs; they are all
freely assignable so that they can be used in conjunction
with any of the audio/video input functions of the
receiver.
Note that you’ll need to assign the component video
input (see
Assigning the component video inputs on
page 89), or else you may see the S-video or composite
video input instead.
• Use a three-way component video cable for the
connection.
2 Connect the COMPONENT VIDEO MONITOR OUT
jacks on this receiver to the component video inputs
on your TV or monitor.
• Use a three-way component video cable.
About the video converter
The video converter allows you to connect various video
sources using composite, S-video or component video
connections and the signal will be output through all of
the
MONITOR VIDEO OUT jacks. The only exception is
component video input, which is only output from the
component video output. Therefore, if you want to
connect any source using component video, you must
also connect your TV using component video. If several
video components are connected to the same input
function, the converter gives priority to component, S-
video, then composite (in that order).
• You can’t see overlay information if you use different
cord types for the TV and the source component.
• PAL model – With NTSC sources, you will only be able
to convert from S-video to component, and not vice-
versa.
• NTSC model – With PAL sources, you will only be able
to convert from S-video to component, and not vice-
versa.
PLAY
PLAY
AUDIO POWER
AMP
IN
PRE OUT
AUDIO
PHONO
FRONT SUB W CENTER
SUR- ROUND
BACK
SUR- ROUND
SUB W.
CENTER
SUR-
ROUND
CD-R/
TAPE1/
MD
TAPE 2
MONITOR
CD
IN
IN
IN
OUT
IN
OUT
FRONT
CENTER
SUR-
ROUND
SUR-
ROUND
BACK
VIDEO AUDIO S2 VIDEO SPEAKERS
(Single)
USB AUDIO
S400 (AUDIO)
OUT 2
OUT 1
(CD-R/
TAPE1/
MD)
(DVR/
VCR1)
(SAT)
IN
(CD)
(TV/
DVD)
(DVD/
LD)
(DVD/
LD)
IN
DVR/
VCR1
OUT
DVD/
LD
IN
(DVD/
LD)
IN
Y
L
R
L
R
L
R
L
R
P B
P R
P B
P R
2 RF
IN
IN IN
Y
P B
P R
Y
P B
P R
Y
TV/
DVD
IN
SAT
IN
IN
IN
IN
IN
OUT
OUT
OUT
1
2
12V TRIGGER
DC OUT 12V
TOTAL 100mA MAX
IN
IN
IN
VCR2
OUT
IN
VCR3
OUT
IN
1 IN
REC
REC
OUT
DIGITAL MONITOR
OUT 1
MONITOR
OUT 2
MONITOR
OUT
COMPONENT VIDEO
ASSIGNABLE MULTI CH INPUT RS-232C
ANTENNA
AM LOOP ANTENNA
FM 75 Ω UNBAL
2 IN
3 IN
4
IN
5
R L
R L R L
R L (Single)
1
(Single)
2
(Single)
R L
R L
R L
R L
R L
IN
6
ASSIGNABLE
CONTROL
IN
3
1
2
AC IN
B
SELECTABLE (SURROUND BACK & B )
A
TWO VOLTAGE SELECTORS
220V
230-240V 110V
120-127V
110V 120-127V
230-240V 220V
VSX-AX10Ai
Y
P B
P R
COMPONENT
VIDEO
Y
P B
P R
COMPONENT
VIDEO
DVD player
1
2
TV