Planet Technology 802.11g Wireless ADSL 2/2+ Router ADW-4401A/Bv2 User Manual

Page 34

Advertising
background image

34

3.7.1.1 Router Local IP

IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for
example, 192.168.1.1 (default setting).
IP Subnet Mask: Your ADSL router will automatically calculate the subnet mask
based on the IP address that you assign. Unless you are implementing sub netting, use
the subnet mask computed by the ADSL router.
Dynamic Route: Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please
refer to

Dynamic Routing.

The only difference is the interface.

3.7.1.2 DHCP Server

The DHCP Server gives out IP addresses when a device is booting up and request an IP
to be logged on to the network. It must be set as a DHCP client to obtain the IP address
automatically. By default, the DHCP Server is enabled. The DHCP address pool
contains the range of the IP address that will automatically be assigned to the client on
the network.

Advertising