31 playback, Vcr operation – Panasonic PV-D4762 User Manual

Page 31

Advertising
background image

31

Playback

When playing back recording which have been
marked using

feature, you can

either set VCR to automatically advance through
marked commercial blocks, or set it so that
commercials are only skipped on your command.

AUTO

:

VCR will automatically advance through
marked commercial blocks recorded on the
tape and then resume playback.

MANUAL :

VCR will advance through commercials only
when CA/ZERO is pressed. Playback will
resume when the end mark of a commercial
block is found, or a new recording or blank
portion is detected, or after 8 minutes.

• The selection mode in step 3 remains set unless there is a power outage in which case the

original factory setting will be restored.

• If playback is started in the middle of a commercial, only a single commercial is shown, or an

individual commercial is longer than 1 minute, a commercial may not be skipped.
Press FF to quickly advance through the commercial.

• Part of a recorded program may be skipped over if the program portion between commercials

is less than 1 minute or there are frequent dark and quiet scenes during the program. To view
the portion of tape being incorrectly skipped, press PLAY while the VCR is skipping, reverse
the tape to a point just prior to where the skipping began and press PLAY again. This time the
group will not be automatically skipped. Automatic skipping will be re-enabled when the end of
the marked group is detected.

4

Press ACTION twice
to return to normal screen.

PLAY

*Important: If a remote control button does not work when pressed, press

the VCR button on the remote and try the button again.

and

are

registered trademarks of SRT, Inc.
A Jerry lggulden invention licensed
in association with Arthur
D. Little Enterprises, Inc.

U.S.Pat. No. 5,333,091;
5,692,093; 5,696,866
other patents pending

Notes

VCR

Operation

SET

NUMBER

keys

SELECT

ACTION

CA/ZERO

Press
to select “SET UP
COMMERCIAL ADV.,”
and press SET to
display.

Press
to select “C/A
PLAYBACK,”
and press SET to set
“AUTO” or “MANUAL”.

2

3

1

Press ACTION
to display MENU.

SELECT :
EXIT : ACTION

SET:SET

MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL

SET UP COMMERC I AL ADV.

IDIOMA/LANGUE : ENGL I SH
VCR’S OUTPUT CH:3

SELECT : SET : SET
EXIT : ACT I ON

SET UP COMMERCIAL ADV.
C/A RECORD :ON

C/A PLAYBACK :AUTO

FF

Advertising