Panasonic PV-D4762 - Manual (Page 33)

33
helps you locate certain
parts of prerecorded movies (rented or
purchased). The feature works in two ways.
• You can go to the beginning of the movie.
• You can skip from one preview to the next.
works only on tapes
recorded in SP speed with the record tab
removed.
Insert a tape
without record tab.
Press SEARCH/ M/A SKIP* three times to
display MOVIE ADVANCE.
Select “GO TO START MOVIE,” if you want
to advance directly to beginning of the
movie.
➛ ➛ ➛ ➛ ➛ continue with step 4.
Select “GO TO PREVIEW,” if you want to
view the first (next) preview.
➛ ➛ ➛ ➛ ➛
go to “To Search for Preview” at right.
Press FF
to start searching.
• To cancel,
press STOP.
Press PLAY
to start playback.
When the movie is found...
• To cancel,
press STOP.
1
2
Start preview searching.
When a preview is detected, VCR
will start playback.
To Search for Preview.
Start next preview searching.
1) In step 3 at left, select “GO
TO PREVIEW.”
2) Press FF.
Press SEARCH/ M/A SKIP.
• To cancel, press STOP.
You can override the operation of
SEARCH FOR
PREVIEWS mode by pressing SEARCH/ M/A
SKIP during tape searching.
works by searching
the tape past each preview and then reversing
back to the start of the detected preview.
While the tape is reversing back, if SEARCH/ M/
A SKIP is pressed,
will
begin searching for the next preview.
While searching for the next preview, if you see
the start of a preview which you wish to watch,
press SEARCH/ M/A SKIP and
will immediately
reverse back to the start of that preview,
instead of searching further past the preview
start point. Once the VCR is playing a preview,
press SEARCH/ M/A SKIP to advance to the
next preview, long commercial or the start of
the movie (whichever is next).
• If you want to playback, press PLAY.
2
3
1
4
Press to select
“GO TO START
MOVIE” or “GO TO
PREVIEW.”
5
*Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Ready Checklist
All connections are made.
One time Setup completed.
VCR is plugged in.
TV is turned on and set to CH3, 4
or Video on TV.
GO TO START MOVIE
GO TO PREVIEW
SEARCH START : FF
SELECT :
EXIT : SEARCH M/A SK I P
MOVIE ADVANCE
SEARCHING FOR START
OF MOVIE
CANCEL : STOP
MOVIE ADVANCE
THE MOVIE IS READY
START : PLAY
CANCEL : STOP
MOVIE ADVANCE
VCR
Operation
SET
STOP
SELECT
SEARCH/
M/A SKIP
PLAY