Panasonic PV-D4762 - Manual (Page 37)

37
SELECT :
EXIT : ACTION SET:SET
MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
SET UP COMMERC I AL ADV.
IDIOMA/LANGUE : ENGL I SH
VCR’S OUTPUT CH:3
ACTION
SET
Special VCR Features
SELECT
*Important: If a remote control button does not work
when pressed, press the VCR button
on the remote and try the button again.
When set to ON, all operations
except for timer record and tape
eject are prohibited. Useful for
households with small children.
VCR Lock Feature
VCR LOCK ACT I VATED
VCR LOCK OFF
• VCR Lock cancels in 24 hours if
clock is set.
To turn off, repeat above.
To turn on, hold down REC on
DECK in Stop mode with no
tape inserted for 7 seconds.
(Please ignore “NO CASSETTE”
warning.)
REC
SELECT :
EXIT : ACTION SET:SET
MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
SET UP COMMERC I AL ADV.
IDIOMA/LANGUE : ENGL I SH
VCR’S OUTPUT CH:3
VCR
Operation
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
• ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF: Screen turns solid blue when signal is weak or
non-existent.
• Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION twice
to return to normal screen. 4
3
2 Press
to select “SET UP
CHANNEL,” and
press SET.
Press
to select “WEAK SIGNAL
DISPLAY,” and
press SET
to set “ON” or “OFF.”
1 Press ACTION
to display MENU.
Auto Shut-Off Feature
The power shuts off at a preset time.
3
1
4
Press
to select “AUTO SHUT-OFF.”
Press SET repeatedly to
change shutoff time as
shown below.
Press ACTION twice
to return to normal screen.
Press ACTION
to display MENU.
2 Press
to select “SET UP VCR,” and
press SET.
• The shut-off countdown will not
function during Play or Record.
Note
SELECT : SET: SET
EXIT : ACT I ON
ANTENNA : CABLE
AUTO SET
WEAK S I GNAL D I SPLAY:OFF
SET UP CHANNEL
REPEAT PLAY : OFF
REMOTE WARN I NG : ON
AUTO SHUT-OFF : OFF
SELECT : SET: SET
EXIT : ACT I ON
SET UP VCR
OFF
2 Hours
6 Hours
4 Hours