Recording, Operations, Tape refresh – Panasonic NV-VP60 Series User Manual

Page 17

Advertising

RQTV0115

Recording

VHS

Operations

You can start recording quickly and set a duration.

During recording, press [

¥REC/OTR] on the unit

repeatedly.

Select the desired recording duration.

≥Each time you press the button, the indication on the unit’s display

changes as follows:

Counter display (normal recording mode)

> 30 (min) >

60 (min)

> 90 (min) > 120 (min) > 180 (min) >

240 (min)

> Current time (normal recording mode)

≥The unit will automatically switch off when OTR is completed.

¬ To stop OTR at any time
Press [

∫STOP] or [Í/I] (ÍVHS).

Notes:
≥The OTR function works during normal recording only.
≥When the tape reaches its end during OTR, the unit will turn itself

off.

You can record from other video sources (VHS, camera, etc.).
≥Connect the other equipment to this unit as shown. If audio output

on the other equipment is monaural, use a stereo-monaural
conversion cable (not supplied).

≥Insert a recorded video cassette with an intact erasure prevention

tab.

≥Set A1 or A2 with [INPUT SEL] to select the audio/video source

required.

.........................................................................................................................................................................................................................

[1] Press [

1PLAY].

Find the recording start
point.

.............................................................................................

[2] Press [

;/DPAUSE],

then press [

¥REC].

Put the unit in recording
standby mode.

.............................................................................................

[3] Start play on the

other equipment.

.............................................................................................

[4] Press

[;/DPAUSE]

to start recording.

¬ To stop recording
Press [

∫STOP].

You can delete all the contents of a video cassette (the picture and
sound data).

[1] Insert the cassette

that you want to
refresh and press
[MENU].

.............................................................................................

[2] Press [

34] to

select “TAPE
REFRESH” and then
press [ENTER].

.............................................................................................

[3] Press [ENTER] for

2 seconds or more
to start the tape
refresh function.

The tape refresh function
starts.

≥The tape is rewound to the

beginning and is then
erased as it is fast-
forwarded.

≥When the end of the video

cassette is reached, the
unit automatically rewinds it
to the beginning.

Note:
≥When a video cassette with a broken erasure prevention tab is

inserted, this function is not activated.

One-Touch Recording (OTR)

Recording from an External Source

STOP

REC/OTR

AUDIO

OUT

VIDEO

OUT

AV2 IN (AUDIO/VIDEO)

AV1 IN (AUDIO/VIDEO)