Timer recording, Press [prog/check, Press [ timer] to make “ ” stop – Panasonic NV-VP60 Series User Manual

Page 18: 1] press [prog/check] twice, 3] press [reset] to cancel, 4] press [menu] to exit the on-screen display

Advertising

RQTV0115

Timer Recording

Up to 16 timer programmes, including weekly and daily programmes,
can be recorded for up to one month in advance by setting the timer.
≥Select the unit viewing channel (or the AV input) on the TV.
≥Insert a video cassette with an intact erasure prevention tab (

l 4).

≥Check that the clock is set to the correct time. If it has not been set,

refer to page 13.

≥Press [VHS SELECT] (

l 8).

.........................................................................................................................................................................................................................

[1]

Press

[PROG/CHECK].

..........................................................................................................

[2]

Press [

2 1] to set the

date the TV programme
will be broadcast and
then press [

4].

A. Current date (e.g.17th)

l ;:

l The date before one month later (e.g.16th)

l ;:

l Daily: SU–SA ,-. MO–SA ,-. MO–FR

l ;:

a. Weekly:SU ,-. ... ,-. SA

(SU

uSunday, MOuMonday, TUuTuesday, WEuWednesday,

uThursday, FRuFriday, SAuSaturday)

[3]

Press [

2 1] to select the programme position

of the desired TV station and then press [

4].

≥Select “A1” or “A2” when recording from an external source

(

l 17).

≥You may also use [INPUT SEL] and numeric buttons to select

the channel position.

[4]

Press [

2 1] to set the starting time and then

press [

4].

≥When [2 1] is kept pressed, the indication changes in

30-minute steps.

[5]

Press [

2 1] to set the ending time and then

press [

4].

≥When [2 1] is kept pressed, the indication changes in

30-minute steps.

[6]

Press [

2 1] to set the

desired Rec Mode and
then press [

4].

,-.LP,-.EP,-.A

,-.SP

Recording Mode Auto Change function (

l right)

≥You may also use [REC MODE] to set the recording mode.

[7]

Press [

TIMER] to

switch this unit to the
timer recording
standby mode.

For example, if you want to record something else before the
programme start time:

Press [

TIMER] to make “

” stop.

≥Be sure to press [

TIMER] again before the programme start

time to put the unit on recording standby.

The timer recording only works if “

” is on.

≥This unit must be turned on or in timer recording standby mode.

[1] Press [PROG/CHECK] twice.

≥The Timer Programme List

screen appears.

..........................................................................................................

[2] Press [PROG/CHECK]

repeatedly to select the
programme.

≥Every time you press

[PROG/CHECK], the cursor
shifts down.
You can also select the
programme by pressing [

34].

..........................................................................................................

[3] Press [RESET] to

cancel.

[4] Press [MENU] to exit the on-screen display.

Notes:
≥If timer recording is not completed (due to insufficient tape or

cancellation by the user), the programmed timer recording data will
be cancelled from the memory by 4 A.M. two days later.
However, if the timer recording function is activated at that time, the
programmed timer recording data will not be cancelled.

≥After you cancel the programmed timer recording data, the current

recording mode during the stop mode is displayed.

≥If you turn off the power during a timer recording, the running

indicator goes out.

≥During recording, timer recording and copying, the “

” indicator

lights up even while DVD section is activate.

≥During timer recording and timer recording standby mode, the “

”

indicator lights up even while the DVD section is activate.

1. DATE

2. CH

3. ON T I ME

4. OFF T I ME

5. REC MODE

6. PUSH ENTER

EASY PROGRAMMING

CHECK:PROG/CHECK

SET

ENTER

– – – –

– – : – –

– –

1. DATE

2. CH

3. ON TIME

4. OFF T I ME

REC

MODE

PUSH ENTER

EASY PROGRAMMING

CHECK:PROG/CHECK

SET

ENTER

29 WE

20 : 02

21 : 30

PROGRAMME IS COMPLETE.

NEXT PROG. :PROG/CHECK

To release the unit from timer recording standby

Recording Mode Auto Change Function

If a timer recording is performed in SP mode, this function
automatically changes the recording mode if the unit determines
that the remaining tape time is insufficient to record the entire
programme.
If the remaining tape time is still not sufficient even in LP/EP mode,
the programme cannot be recorded to the end.

The recording mode will change as follows:
PAL system:

# LP

NTSC system:

# EP

≥This function cannot change the recording speed to the EP mode

for PAL system.

e.g. NTSC system (when using a 60-min tape)

≥The tape length must be set correctly (

l 21).

≥Some tapes may not work correctly.
≥If the recording speed changes during a timer recording, some

picture distortion will occur at the point the speed changes.

To Check and Cancel a Timer
Programme

1st programme

(30 min)

2nd programme (60 min)

Timer programming

30 min at SP

15 min

at SP

45 min

at EP

Video tape

DATE

CH ON

OFF

29SA

20 : 02

21 : 30 SP

- SA

10 : 30

11 : 00 A

15 : 00

16 : 00 SP

19WE

22 : 15

23 : 30 EP

28FR

20 : 02

21 : 30 SP

30SU

19 : 10

19 : 55 EP

– – – –

– –

: – –

– –

: – –

– –

– – – –

– –

: – –

– –

: – –

– –

1
2
3
4
5
6
7
8

END

: MENU

SET :

DATE

CH ON

OFF

29SA

20 : 02

21 : 30 SP

- SA

10 : 30

11 : 00 A

19WE

22 : 15

23 : 30 EP

28FR

20 : 02

21 : 30 SP

– – – –

– –

: – –

– –

: – –

– –

1
2
3
4
5

VP60GCS.book Page 18 Monday, March 6, 2006 3:23 PM

Advertising

Popular Brands

Popular manuals