Dv d, Operations, Digital output – Panasonic NV-VP60 Series User Manual
Page 33
DV
D
Operations
To Enjoy Movies and Music More
RQTV0115
33
33
For
[DVD-V[
When you have connected equipment through this unit’s COAXIAL
DIGITAL AUDIO terminal (
l 10), change the settings for “PCM
Digital Output”, “Dolby Digital”, “DTS Digital Surround” and “MPEG”
(
l 37). You can enjoy powerful movie theater and hall-like sound.
........................................................................................................................................................................................................................
[1] Press [SETUP].
..................................................................................................
[2] Press [
34] to
select “Audio”.
..................................................................................................
[3] Press [
1] (cursor)
then [
34] to select
the item (
l below),
and then press
[ENTER].
........................................................................................................................................................................................................................
[4] Press [
34] to select the item and then press
[ENTER].
........................................................................................................................................................................................................................
[5] Press [SETUP] to end the settings.
Check the digital input limitations of the equipment you have
connected using COAXIAL terminal and select the maximum
sampling rate of the PCM digital output.
Up to 48 kHz (Initial setting): When connected to equipment
compatible with 44.1 kHz or 48 kHz
Up to 96 kHz:
When connected to equipment
compatible with 88.2 kHz or 96 kHz
Notes:
≥Signals from copy-protected discs are converted to 48 kHz or
44.1 kHz.
≥Some equipment cannot handle sampling rate of 88.2 kHz even if
they can handle 96 kHz. Read your equipment’s operating
instructions for details.
Bitstream (Initial setting for Dolby Digital and DTS Digital Surround):
Select if the equipment you connected can decode the signal.
PCM (Initial setting for MPEG
§
):
Select if the equipment you connected cannot decode the signal.
§
MPEG: for NV-VP60GC only
IMPORTANT
Select “Bitstream” when the equipment can decode the bitstream
(digital form of multi-channel data). Otherwise, select “PCM”.
Digital Output
PCM Digital Output
Dolby Digital, DTS Digital Surround and MPEG
§
DVD Setup
Disc
Video
Audio
Display
Others
to select and
press
to exit
ENTER
RETURN
PCM Digital Output
Up to 48 kHz
DTS Digital Surround
Bitstream
MPEG
PCM
Off
Dynamic Range Compression
Dolby Digital
Bitstream
VP60GCS.book Page 33 Monday, March 6, 2006 3:23 PM