Panasonic KX-FPG391 - Manual (Page 62)

4. Fax
60
4.7 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Caller ID service, this feature
prevents fax reception from calls that do not
show caller information.
Additionally, faxes originating from numbers that
match a programmable junk fax prohibitor list will
not be accepted by the fax machine (page 60).
L Keep the front cover page open for button
locations.
Important:
L This feature does not work when:
–
the unit is set to the TEL mode, or
– manual reception is performed.
4.7.1 Activating the junk fax
prohibitor
1 Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2 Press {>}.
3 Press {A} or {B} repeatedly to select “ ON”.
4 Press {SET}.
5 Press {MENU} to exit the program.
L While the junk fax prohibitor is activated,
“
JUNK FAX ON” is displayed.
4.8 Storing undesired
callers
You can register up to 10 undesired numbers
from the caller’s list if you do not wish to receive
faxes from them.
L Keep the front cover page open for button
locations.
1 Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2 Press {>} repeatedly to display “ JUNK
LIST SET”.
3 Press {SET}.
4 Press {A} or {B} repeatedly to display the
item you wish to prevent the fax reception
from.
5 Press {SET}.
L To program other items, repeat steps 4 to
5.
6 Press {STOP} to exit the program.
Note:
L If there is no space to store new items, “ LIST
FULL” is displayed in step 3 or step 5. Erase
unnecessary items.
To display the junk fax prohibitor list
1. Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “ JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} to display the item.
5. Press {MENU} to exit the program.
To print the junk fax prohibitor list
1. Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “ JUNK
LIST PRINT”.
3. Press {SET}.
4. Press {MENU} to exit the list.
To erase an item from the junk fax
prohibitor list
1. Press {MENU} repeatedly to display “ JUNK
FAX PROH.”.
2. Press {>} repeatedly to display “ JUNK
LIST DISP.”.
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired item.
5. Press {<}.
L To cancel erasing, press {STOP}, then
press {MENU}.
6. Press {SET}.
L The item is erased.
7. Press {MENU} to exit the list.
FPG391_en.book Page 60 Friday, July 16, 2004 5:38 PM